manualshive.com logo in svg

Dell Latitude 3301, Руководство по обслуживанию, Страница: 46 / 69

Поделиться
Скачать
Dell Latitude 3301 Скачать руководство пользователя страница 46

1 

Remove the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.

2 

Remove the screw (M1.6x2) that secures the power button with fingerprint reader to the palm-rest and keyboard assembly.

3 

Open the latch and disconnect the fingerprint-reader cable from the fingerprint-reader board.

4 

Lift the power button with fingerprint-reader, along with the power-button cable, off the palm-rest and keyboard assembly.

Installing the power button with fingerprint reader

NOTE: 

This procedure is only applicable for computers shipped with a fingerprint reader.

If you are replacing a component, remove the existing component before performing the installation procedure.

The following image indicates the location of power button with fingerprint reader and provides a visual representation of the installation 
procedure.

46

Removing and installing components

Содержание Latitude 3301






































































Отзывы:

Нет отзывов