10 Install the:
a
11 Follow the procedure in
After working inside your computer
.
Stylus
Removing stylus
1
Follow the procedure in
Before working inside your computer
.
2
Locate the stylus at the top of the tablet.
3
Pull the stylus by the thread upward.
NOTE:
Avoid pulling the stylus attached with the stretchable thread.
4
Pull the stylus from the groove on the tablet.
NOTE:
Pull the stylus until the tip of the pen is visible at the mouth of the groove.
The stylus is ready to assist you in using the rugged tablet.
For more details, see
Getting the stylus ready for use
Installing stylus
1
Align the stylus with the groove on the tablet.
2
Push and smoothly slide it inside to secure the stylus.
NOTE:
Avoid hanging the stylus detached from its groove when not in use.
18
Removing and installing components
