NOTE:
There are two battery release buttons for removing Battery 1 and Battery 2 on the tablet. Ensure to remove
both, before uninstalling other components of the system.
Installing the battery
1
Insert the battery into the battery slot.
NOTE:
Ensure the metal pin of the battery is aligned in place.
2
Slide the battery into the slot until it clicks into place.
3
Make sure the battery latch is back to the locked state.
NOTE:
There are two battery. Perform steps 1 to 3 to install battery 1 and battery 2 on the tablet.
4
Follow the procedure in
After working inside your computer
.
Subscriber Identification Module (SIM) card
Removing uSIM
1
Follow the procedure in
Before working inside your computer
.
2
Remove the left
3
Lift the latch [1] and pull the SIM slot cap [2].
Removing and installing components
11
