Dell INSPIRON Inspiron 5000, Руководство по обслуживанию

Страница: 19 / 100

Removing the drives from the hard-drive cage
NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in Before working inside your Embedded Box PC . After working inside your Embedded Box PC,
follow the steps in After working inside your Embedded Box PC . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive.
CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive while the Embedded Box PC is in sleep or
on state.
Topics:
• Prerequisites
• Procedure
Prerequisites
Follow step 1 to step 6 in “ Removing the back cover ”.
Procedure
NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or both, depending on the configuration ordered.
1. Remove the screws that secure the top drive to the hard-drive cage.
2. Slide the top drive out of the hard-drive cage.
1. back cover 2. STDF (L5.1), M3x3 screws (4)
3. hard-drive cage 4. hard drive/solid-state drive
Procedure to remove bottom drive
1. Remove the screws that secure the bottom drive to the hard-drive cage.
2. Lift and slide the bottom drive out of the hard-drive cage.
8
Removing the drives from the hard-drive cage 19