1. Slide and place the CPU fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the CPU fan with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two (M2x4) screws to secure the CPU fan to the palm-rest and keyboard assembly.
4. Connect the CPU fan cable to the system board.
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Heat sink
Removing the heat sink—UMA
NOTE:
The heat sink type in your computer varies depending on the configuration ordered.
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
5. Remove the
.
The figure indicates the location of the heat sink and provides a visual representation of the removal procedure.
32
Removing and installing components
Содержание Inspiron 7591
Страница 1: ...Inspiron 7591 Service Manual Regulatory Model P83F Regulatory Type P83F001 ...
Страница 53: ...Removing and installing components 53 ...
Страница 55: ...Removing and installing components 55 ...
Страница 56: ...56 Removing and installing components ...