Dell Inspiron 7490 P115G, Руководство по обслуживанию

Страница: 38 / 81

Steps
1. Using the alignment post, slide and place the touchpad along with the bracket into the slot on the palm-rest assembly.
2. Adhere the touchpad cable from the touchpad.
3. Replace the four (M1.6x2) screws that secure the touchpad bracket to the palm-rest assembly.
4. Slide the touchpad cable into its connector on the touchpad and close the latch to secure the cable.
Next steps
1. Install the battery .
2. Install the base cover .
3. Follow the procedure in after working inside your computer .
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
About this task
The following image indicates the location of display assembly and provides a visual representation of the removal procedure.
38 Removing and installing components