Dell Inspiron 5593 Скачать руководство пользователя страница 78

Страница: 78 / 83

Boot Sequence

Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example:
optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:

•

Access System Setup by pressing F2 key

•

Bring up the one-time boot menu by pressing F12 key

The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:

•

Removable Drive (if available)

•

STXXXX Drive (if available)

NOTE:

XXX denotes the SATA drive number.

•

Optical Drive (if available)

•

SATA Hard Drive (if available)

•

Diagnostics

NOTE:

Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup screen.

Clearing CMOS settings

CAUTION:

Clearing CMOS settings will reset the BIOS settings on your computer.

1. Remove the

base cover

2. Disconnect the battery cable from the system board.
3. Remove the

coin-cell battery

4. Wait for one minute.
5. Replace the

coin-cell battery

6. Connect the battery cable to the system board.
7. Replace the

base cover

Clearing BIOS (System Setup) and System
passwords

To clear the system or BIOS passwords, contact Dell technical support as described at

www.dell.com/contactdell

NOTE:

For information on how to reset Windows or application passwords, refer to the documentation accompanying

Windows or your application.

System setup

Содержание Inspiron 5593




















































































Результаты поиска

Содержание Inspiron 5593

Отзывы:

Похожие инструкции для Inspiron 5593

Бренды по названию

Популярные бренды

Dell Inspiron 5593, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5593

Отзывы:

Похожие инструкции для Inspiron 5593

Бренды по названию

Популярные бренды