Installing display assembly
1
Place the chassis on a plane surface.
2
Align the display assembly with the screw holders on the system and place it on the chassis.
3
Close the display.
4
Replace the two screws that secure the display assembly.
5
Flip over the system and replace two screws to secure the display assembly to the system.
6
Replace the single screw that secure the power connector bracket and the display cable to the system.
7
Connect the display cables to the connectors on the system board.
8
Place the metal bracket to secure the display cable.
9
Replace the (M2x3) screws to secure the metal bracket to the system.
10 Route the WLAN and WWAN cables through the routing channels.
11 Install the:
a
b
c
d
e
12 Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
51
