7.
Align the notch on the bottom of the module with the crossbar in the connector.
8.
Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
9.
Replace the computer cover (see
Replacing the Computer Cover
).
10.
Connect your computer and devices to electrical outlets, and then turn them on.
11.
When the message appears stating that memory size has changed, press <F1> to continue.
12.
Log on to your computer.
13.
Right-click the
My Computer
icon on your Windows desktop and click
Properties
.
14.
Click the
General
tab.
15.
To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Back to Contents Page
1 Pair A: matched pair of memory
modules in connectors DIMM_1
and DIMM_2
2 Pair B: matched pair of memory
modules in connectors DIMM_3
and DIMM_4
1
cutouts (2)
2
memory module
3
notch
4
crossbar
NOTICE:
To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the
module.
Содержание Inspiron 518
Страница 26: ...Back to Contents Page ...
