Dell Inspiron 3670 Скачать руководство пользователя страница 64

Страница: 64 / 76

System setup

NOTE:

Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

Topics:

•

Boot Sequence

•

Navigation keys

•

BIOS overview

•

Entering BIOS setup program

•

System Setup Options

•

Flashing the BIOS

Boot Sequence

Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example:
optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:

•

Access System Setup by pressing F2 key

•

Bring up the one-time boot menu by pressing F12 key

The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:

•

Removable Drive (if available)

•

STXXXX Drive

NOTE:

XXX denotes the SATA drive number.

•

Optical Drive (if available)

•

SATA Hard Drive (if available)

•

Diagnostics

NOTE:

Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup screen.

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the

system.

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

Enter

Selects a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop

‐

down list, if applicable.

Tab

Moves to the next focus area.

System setup

Содержание Inspiron 3670













































































Результаты поиска

Содержание Inspiron 3670

Отзывы:

Dell Inspiron 3670, Руководство по обслуживанию, Страница: 64 / 76

Результаты поиска

Содержание Inspiron 3670

Отзывы: