manualshive.com logo in svg

Dell Inspiron 3670, Руководство по обслуживанию, Страница: 25 / 76

Поделиться
Скачать
Dell Inspiron 3670 Скачать руководство пользователя страница 25

Removing the graphics card

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

 

Topics:

•

Prerequisites

•

Procedure

Prerequisites

Remove the 

computer cover

.

Procedure

1 

Remove the screw (#6-32x6.35) that secures the card-retention bracket to the chassis.

2 

Rotate the card-retention bracket away from the chassis to access the expansion cards.

3 

Push and hold the securing tab on the graphics-card slot.

4 

Hold firmly on the edge of the graphics card and lift it out of the slot on the graphics-card slot.

12

Removing the graphics card

25

Содержание Inspiron 3670













































































Отзывы:

Нет отзывов