manualshive.com logo in svg

Dell Inspiron 3670, Руководство по обслуживанию, Страница: 24 / 76

Поделиться
Скачать
Dell Inspiron 3670 Скачать руководство пользователя страница 24

Replacing the solid-state drive/Intel Optane

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

CAUTION: 

Solid-state drives are fragile. Exercise care when handling the solid-state drive.

 

Topics:

•

Procedure

•

Post-requisites

Procedure

1 

Align the notch on the solid-state drive or Intel Optane memory with the tab on the M.2 card slot.

2 

Slide the solid-state drive or Intel Optane memory into the M.2 card slot on the system board.

3 

Replace the screw (M2x3.5) that secures the solid-state drive or Intel Optane memory to the system board.

Post-requisites

Replace the 

computer cover

.

11

24

Replacing the solid-state drive/Intel Optane

Содержание Inspiron 3670













































































Отзывы:

Нет отзывов