Dell Inspiron 3420, Руководство по обслуживанию

Страница: 25 / 119

5. Follow the procedure in after working inside your computer .
M.2 solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the microSD-card .
3. Remove the SIM card tray for 4G LTE enabled systems.
4. Enter the service mode .
5. Remove the base cover .
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Remove the (M2x3) screw that secures the solid-state drive to the system board.
2. Slide and remove the solid-state drive from the solid-state drive slot on the system board.
Installing the M.2 2230 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
Removing and installing components 25