Dell Inspiron 2000, Справочное и ремонтное руководство

Страница: 43 / 132

support.dell.com Basic Troubleshooting 3-5
NOTE: Because of different conventions currently used in the industry, not all
DVD titles work in all DVD-ROM drives.
Run the IDE Devices device group as described in “Running the Dell
Diagnostics” found later in this chapter.
Refer to “Troubleshooting the CD-ROM or DVD-ROM Drive” found later in this
chapter for further troubleshooting information.
If you have hard-disk drive problems, perform the following checks:
For Windows 98, run the ScanDisk utility by clicking the Start button, pointing to
Programs—> Accessories—> System Tools , and clicking ScanDisk .
For Windows NT, run the error-checking utility by opening the property sheet of
the affected volume(s) and clicking
Check Now in the Error-checking section of
the Tools tab.
Run the IDE Devices device group as described in “Running the Dell
Diagnostics” found later in this chapter.
Check the settings on the
IDE Configuration
submenu of the system setup
program as described in Appendix B, “Using the System Setup Program.”
You can clean a diskette drive using a commercially available cleaning kit. These kits
contain pretreated diskettes to nonabrasively remove contaminants that accumulate
during normal operation.
If the kit does not contain instructions, insert a pretreated diskette into the drive and
turn on the system. After 20 or 30 seconds, remove the diskette from the drive.
% $ :
" $
,
Looking at and listening to your computer is important in determining the source of a
problem. Look and listen for the indications described in Table 3-1.
If the problem is still not resolved, see the next subsection, “System Setup Program
Options.”
"$% 1('
An error message See Appendix C, “Error Messages.”
The power indicator If the computer’s power status indicator does not come on, see “Power” found
earlier in this chapter.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the system Help.