7. Press down on the display bezel and snap the display bezel in place.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
.
After working inside your computer
.
Camera
Removing the camera module
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
.
About this task
The following images indicate the location of the camera module and provides a visual representation of the removal procedure.
Steps
1. Using the pull tab, disconnect the camera cable from the camera module.
2. Using a plastic scribe, pry the camera module from the display assembly.
NOTE:
Start prying the camera module in a sequential order 1>2>3 as indicated on the display back cover.
3. Lift the camera module from the display assembly.
60
Removing and installing components
