Dell Inspiron 13 5000 Series 2-in-1, Руководство по обслуживанию

Страница: 73 / 139

Removing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
NOTE: Your computer’s Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables
correctly after you replace the system board.
Prerequisites
1 Remove the base cover .
2 Remove the battery .
3 Remove the memory module .
4 Remove the heat sink .
Procedure
1 Disconnect the fan cable and the power-adapter port cable from the
system board.
2 Peel off the pieces of tape that secure the display cable and touch-screen
board cable from their respective connectors.
73