Replacing the Palm Rest
1.
Follow the instructions in
Before You Begin
.
2.
Align the palm rest on the computer base and gently snap the palm rest into place.
3.
Slide the touch pad cable and the power button board cable into their connectors on the system board and press down on the connector latch to secure
the cables.
4.
Replace the three screws that secure the palm rest to the computer base.
5.
Follow the instructions from
step 5
to
step 7
in
Replacing the Hard Drive
.
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Close the display and turn the computer over.
8.
Replace the four screws that secure the palm rest to the computer base.
9.
Replace the two rubber caps that cover the palm rest screws on the computer base.
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
power button board cable connector
2
screws (3)
3
touch pad cable connector
4
plastic scribe
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Содержание Inspiron 1122
Страница 13: ...Back to Contents Page ...
Страница 31: ...Back to Contents Page ...