Replacing the Touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the tabs on the touchpad into the slots on the palmrest and
keyboard assembly.
2
Align the screw holes on the touchpad with the screw holes on the
palmrest and keyboard assembly.
3
Replace the screws that secure the touchpad to the palmrest and
keyboard assembly.
4
Slide the touchpad cable into the touchpad connector and press down
the latch to secure the cable.
Post-requisites
1
Replace the
battery
.
2
Replace the
base cover
.
38
Содержание Inspiron 11-3147 2-in-1
Страница 15: ...4 Turn the computer over 5 Press and hold the power button for 5 seconds to ground the system board 15 ...
Страница 24: ...1 plastic scribe 2 coin cell battery 3 battery socket 24 ...
Страница 62: ...1 display panel assembly 2 plastic scribe 3 display back cover and antenna assembly 62 ...
Страница 75: ...5 Lift the display cable off the display bezel 1 display cable 2 routing guides 75 ...