Dell IDRAC6, Руководство пользователя

Страница: 97 / 472

Configuring iDRAC6 Enterprise Using the Web Interface
97
e
To add an additional email alert destination, repeat step a through
step d . You may specify up to four email alert destinations.
Configuring IPMI Over LAN
1
Log in to iDRAC6 Web interface.
2
Configure IPMI over LAN:
a
Click System
→
Remote Access
→
iDRAC6 , and then click the
Network/Security tab.
The Network screen appears.
b
Click IPMI Settings .
c
Select the Enable IPMI Over LAN check box.
d
Update the Channel Privilege Level Limit , if required:
NOTE:
This setting determines the IPMI commands that can be executed
from the IPMI over LAN interface. For more information, see the IPMI 2.0
specifications.
Under IPMI Settings , click the Channel Privilege Level Limit drop-
down menu, select Administrator , Operator , or User , and then click
Apply .
e
Set the IPMI LAN channel encryption key, if required.
NOTE:
iDRAC6 IPMI supports the RMCP+ protocol.
Under IPMI Settings in the Encryption Key field, enter the
encryption key.
f
Click Apply .
3
Configure IPMI Serial over LAN (SOL):
a
Click System
→
Remote Access
→
iDRAC6 , and then click the
Network/Security tab.
The Network screen appears.
b
Click the Serial Over LAN tab.
c
Select Enable Serial Over LAN .
d
Update the IPMI SOL Baud Rate , if needed, by selecting a data speed
from the Baud Rate drop-down menu.