Dell iDRAC 7 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 309

Dell iDRAC 7 Скачать руководство пользователя страница 40

After you configure iDRAC IP address:

•

Ensure that you change the default user name and password after setting up the iDRAC IP address.

•

Access iDRAC through any of the following interfaces:

– iDRAC Web interface using a supported browser (Internet Explorer, Firefox, Chrome, or Safari)
– Secure Shell (SSH) — Requires a client such as PuTTY on Windows. SSH is available by default in most of the Linux

systems and hence does not require a client.

– Telnet (must be enabled, since it is disabled by default)
– IPMITool (uses IPMI command) or shell prompt (requires Dell customized installer in Windows or Linux, available from

Systems Management Documentation and Tools

DVD or

dell.com/support

)

Related links

Setting up iDRAC IP using iDRAC settings utility
Setting up iDRAC IP using CMC web interface
Enabling provisioning server
Configuring servers and server components using Auto Config

Setting up iDRAC IP using iDRAC settings utility

To set up the iDRAC IP address:

1.

Turn on the managed system.

2.

Press <F2> during Power-on Self-test (POST).

3.

In the

System Setup Main Menu

page, click

iDRAC Settings

.

The

iDRAC Settings

page is displayed.

4.

Click

Network

.

The

Network

page is displayed.

5.

Specify the following settings:
•

Network Settings

•

Common Settings

•

IPv4 Settings

•

IPv6 Settings

•

IPMI Settings

•

VLAN Settings

6.

Click

Back

, click

Finish

, and then click

Yes

.

The network information is saved and the system reboots.

Related links

Network settings
Common settings
IPv4 settings
IPv6 settings
IPMI settings
VLAN settings

Network settings

To configure the Network Settings:

NOTE: For information about the options, see the

iDRAC Settings Utility Online Help

.

1.

Under

Enable NIC

, select the

Enabled

option.

2.

From the

NIC Selection

drop-down menu, select one of the following ports based on the network requirement:

40

«
...
38
39
40
41
42
...
»

Содержание iDRAC 7






















































































































































































































































































































Отзывы:

Нет отзывов