Dell I14Z-2026DBK Скачать руководство пользователя страница 39

Страница: 39 / 74

Display-Converter Board

Display-Converter Board

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 15) before working inside the computer.

Removing the Display-Converter Board

Follow the instructions in "Before You Begin" on page 7.

Remove the base cover (see "Removing the Base Cover" on page 11).

Remove the battery (see "Removing the Battery" on page 15).

Disconnect the display-converter-board cable from the system-board

connector.

Remove the two screws that secure the display-converter board to the

palm-rest assembly.

Without pulling hard on the display-converter board, carefully lift the

display-converter board and turn it over.

Disconnect the display-converter-board cable and the display cable from

the connectors on the display-converter board.

Lift the display-converter board out of the computer.

book.book Page 39 Thursday, May 3, 2012 3:09 PM

Содержание I14Z-2026DBK











































































Результаты поиска

Содержание I14Z-2026DBK

Отзывы:

Бренды по названию

Популярные бренды

Dell I14Z-2026DBK, Руководство пользователя

Результаты поиска

Содержание I14Z-2026DBK

Отзывы:

Бренды по названию

Популярные бренды