9
Installation and Startup
|
Starting the UPS
12
Press the
button on the UPS rear panel.
Completing the Startup
13
Verify that the Normal icon
appears on the UPS status summary screen, indicating that the
UPS is operating normally and any loads are powered.
14
On the UPS status summary screen, press the
button to check for active alarms or notices.
Resolve any active alarms before continuing. See “Troubleshooting” in the
Dell Line-Interactive
Tower UPS 500W, 1000W, and 1920/1500W User's Guide
.
If there are no active alarms, a “No Active Alarms” message appears.
15
To change other factory-set defaults, see “Operation” in the
Dell Line-Interactive Tower UPS
500W, 1000W, and 1920/1500W User's Guide
.
Содержание H914N
