Dell G5 15, Руководство по обслуживанию

Страница: 44 / 112

Replacing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer . After working inside your computer, follow the instructions in After working inside
your computer . For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance .
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the screw holes on the status-light board with the screw holes on the computer base.
2 Replace the screw (M2x3) that secures the status-light board to the computer base.
3 Slide the status-light board cable into the connector on the status-light board and close the latch to secure the cable.
Post-requisites
1 Follow the procedure from step 7 to step 23 in Replacing the computer base .
2 Replace the rear cover .
3 Replace the battery .
4 Replace the base cover .
22
44 Replacing the status-light board