Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1510 / 1640

1510 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Advanced ASIC Debugging Commands
• clear hardware unit
• show cpu-interface-stats
• show hardware unit
• show revision
clear hardware unit
c
Clear debugging information on the internal Gigabit Ethernet interfaces on the CSF and FP ASICs.
Syntax clear hardware
{
linecard number
|
rpm number
}
unit number counters
Parameters
Defaults None.
Command Mode EXEC
EXEC Privilege
Command
History
Usage
Information
show cpu-interface-stats
c
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax show cpu-interface-stats { cp | lp | rp1 | rp2}
Parameters
linecard
Enter the keyword
linecard
to clear information about a line
card.
rpm
Enter the keyword
rpm
to clear information about an RPM.
number Enter a number:
• After the keyword
linecard
:
• Range: 0-7 for the C3000
• After the keyword
rpm
:
Range: 0-1
• After the
unit
keyword:
For a line card: Range: 0 - 3
For an RPM: Range 0 - 4
Version 7.5.1.0 Introduction
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
cp
Enter the keyword
cp
to display the CP's interface statistics.
lp
Enter the keyword
lp
to display the LP's interface statistics