Dell Force10 TeraScale C Series, Справочное руководство

Страница: 1374 / 1640

1374 | SNMP and Syslog
www.dell.com | support.dell.com
logging buffered
c e s
Enable logging and specify which messages are logged to an internal buffer. By default, all messages
are logged to the internal buffer.
Syntax logging buffered [ level ] [ size ]
To return to the default values, enter default logging buffered . To disable logging stored to an
internal buffer, enter no logging buffered .
Parameters
Defaults level
= 7;
size
= 40960 bytes
Command Modes
CONFIGURATION
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
Related
Commands
logging console
c e s
Specify which messages are logged to the console.
Syntax logging console
[
level
]
To return to the default values, enter default logging console . To disable logging to the console, enter
no logging console
.
Parameters
Defaults
7 or debugging
Command Modes
CONFIGURATION
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging.
Default: 7 or debugging.
size (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of
messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear the logging buffer.
default logging buffered Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.