Access the console ports
|
35
2
Connect the USB-A end of cable (supplied) into an available USB port on the PC
3
Connect the USB-B end of cable into the USB-B console port on the S55 (
4
Power on the S55.
5
Install necessary USB device drivers (internet connection required).
Contact Dell Force10 Networks Technical Support for assistance if necessary.
6
Open your terminal software emulation program to access the S55.
7
Using the terminal settings shown here, set the terminal connection settings.
• 9600 baud rate, No parity, 8 data bits, 1 stop bit, No flow control
8
The CLI command prompt appears (shown below) when you are connected to the S55.
Step
Task (continued)
Содержание Force10 S55
