Dell Force10 S2410, Руководство пользователя

Страница: 19 / 42

Installing the S2410 | 19
Four-Post Rack-mounting with Cage Nuts
Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If
you are installing two S2410 systems side-by-side, position them at least 5 inches (12.7 cm) apart.
Attach the rack ears first, using only the supplied screws (see Attaching the Rack Ears on page 15 ), and
then follow the steps below to install the S2410 chassis into a four-post rack mounting with cage nuts.
Step Task
1
Attach the two rear brackets to the side panels. Align the three holes in the bracket with the three holes on the
S2410 chassis, and secure the brackets to the chassis using the screws.
Figure 4-6. Four-post Rack-mounting with Cage Nuts, Step 1
2
Align and secure the adjustable bracket onto the rear bracket.
3
Insert the S2410 chassis into the rear of the rack. Position and secure the chassis with two screws into each front
bracket flange and into the rack post.
Figure 4-7. Four-post Rack-mounting with Cage Nuts, Step 3
fn00147f_s2410
Align brackets
Top View of Brackets
fn00147a_s2410