Implementing FCoE in the Linux Operating System
12
Setting up FCoE for SLES 11 SP 2
Installing / verifying FCoE support
If FCoE support has not been installed in SLES 11 SP2, it must be installed. To verify if FCoE support
was installed in SLES 11 SP2, perform the following steps:
1.
Log-in as root, then the start YaST2 Control Center by running the
yast
command. From
YaST2, select
Network Services
in the left-side menu, then use the
Tab
key switch to the
right-side menu. Use the arrow keys to scroll up and down the list of
Network Services
and
look for
FCoE Client Configuration
; if
FCoE Client Configuration
is not listed, as
in Figure 5, then FCoE support is not installed in SLES 11 SP2, and must be installed at this
time.
FCoE support not installed.
Figure 5.
