Printed circuit boards (PCBs)
The following PCBs may be located within the product. Some variation may exist
depending on configuration.
l
DIMMs (number varies by configuration)
l
I/O pcb
l
SSD pcb
l
PDB pcb
l
DIB pcb
l
SP pcb
Disassembling the product
This section describes how to disassemble the product for disposal and recycling.
Required tools
The following tools are required to disassemble the product.
Tool
Description
Phillips
screwdriver
#1
Phillips
screwdriver
#2
Flat-head
screwdriver
Small
Needle-nose
pliers
Use to remove precise hardware from PCBs.
Wire Cutters
Use to remove capacitors, or cut wires
Safety precautions
Comply with the following precautions:
l
Wear protective glasses during disassembly;
l
Follow the recommended disassembly method and sequence;
l
Always use the tool specified in the removal procedures;
l
Follow standard industry best practices, including all applicable health and safety
regulations.
Disassembly sequence
Disassemble the product according to the following disassembly sequence.
1. Remove Power supplies (2)
WEEE Disassembly Instructions
6
EU2SPE
WEEE Disassembly Instructions
