Dell EqualLogic PS4210, Инструкция по установке и настройке

Страница: 34 / 48

Field Description Shortcut Key
Estimated
changes in
storage pool
default
This table estimates how the currently proposed volume size
and snapshot settings affect the existing space in the
designated storage pool.
None
Step 3: Configure iSCSI Access
Field Description Shortcut Key
What kind
of access
type do you
want for
this
volume
?
Allows you to set the access controls for the volume. Select
the radio button for the type of access you want:
• Copy access controls from another volume (
Table 9
)
• Select or define access control policies
• Define one or more basic access points
• None (do not allow access)
• Alt+P
• Alt+L
• Alt+I
• Alt+N
Do you want
to allow
simul-
taneous
access to
this volume
from more
than one
iSCSI
initiator?
Default is No. Select Yes to permit the volume to allow
simultaneous access from initiators with different IQNs.
None
Table 9: Copy access controls from another volume
Field Description Shortcut Key
Select the
volume from
which to
copy access
controls
To apply an access control from another volume, select it
with the mouse or the up and down arrows.
Alt+V
Access
controls
Displays the properties of the access control for the selected
volume. This information helps you choose which volume’s
access controls to copy to the new volume.
None
Table 10: Select or define access controls
Field Description Shortcut Key
Pick one or
more access
policies or
policy
groups
Shows the available access policies and policy groups to
choose from. Select the radio button for Access Policies or
Access Policy Groups to change the list.
To use an existing policy or policy group, either double-click
it, or select it in the Available list and click Add to move it
into the Selected list.
To use all the available policies and policy groups, click Add
All.
Available list: Alt+A
Add: Alt+A
Add All: Alt+D
Selected List: Alt+S
Remove: Alt+R
Remove All: Alt+M
26
PS4210 Installation Guide 5 Storage Allocation