Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 85 / 218

Figure 28 SAS/SATA + NVMe mapping (continued)
Up to eight 2.5-inch SAS/SATA/NVMe front-accessible drives in slots 0 through 7 +
sixteen NVMe front-accessible drives in Bay-0 slots 8 through 11 + Bay-1 slots 0
through 11.
Label the front hard drives
CAUTION
You must reinstall each hard drive to the exact slot that it was removed from.
Take care to note the slot that each hard drive is removed from.
Procedure
1. Note the number of each hard drive at front of the system. Temporarily label
each hard drive before it is removed.
Remove the drive backplane
Before you begin
Follow all safety guidelines.
CAUTION
To prevent damage to the drives and backplane, remove the drives from the
system before removing the backplane.
CAUTION
Note the number of each drive and temporarily label them before you remove the
drive so that you can replace them in the same location.
Note
The procedure to remove the backplane is similar for all backplane configurations.
Procedure
1. Press and hold the blue release tabs, and lift the backplane up to disengage the
slots on the backplane from the hooks on the system.
Note
If your backplane has an expander board, the procedure to remove remains the
same.
Hardware FRU procedures
Label the front hard drives 85