Dell EMC VxFlex Ready Node 13G, Руководство пользователя

Страница: 57 / 84

Output similar to the following is displayed:
Controller = 0
Status = Success
Description = Add VD Succeeded
Results
The VD was created successfully.
Create virtual devices for SSD with PERCCLI
Use PERCCLI to create virtual devices (VDs) for SSDs on a VxFlex Ready Node
server.
Before you begin
Ensure that the PERCCLI disk utility is installed.
Use this procedure both for SSD for storage and SSD to be used to provide caching
acceleration. The VDs created on SSD are configured with Direct IO and write-
through, but read-ahead is not enabled.
Procedure
1. Log in to the server.
2. Create the VD:
perccli64.exe /c0 add vd type=raid0 drives= <EID> : <Slt> direct
wt nora
Example:
perccli64.exe /c0 add vd type=raid0 drives=32:0 direct wt nora
where EID and Slt are the Enclosure ID and Slot ID values, which in this example
are 32:0.
Results
The VD was created successfully.
After you finish
Continue with the procedure that referred you to this topic.
Ensure virtual disk creation with PERCCLI
Use the PERCCLI utility to ensure that a virtual device (VD) was created properly on
each disk.
Procedure
1. Log in to the server.
2. Display the physical device (PD) information:
perccli64.exe /c0/eall/sall show
Output similar to the following is displayed:
Preparing Disks
Ensure virtual disk creation with PERCCLI 57