Table 31. Status LED indicators and descriptions (continued)
Icon
Description
Condition
Corrective action
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the
section.
Memory indicator The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
section.
PCIe indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
section.
NOTE:
For more information about the
supported PCIe cards, see the Expansion card
installation guidelines section.
System health and system ID indicator codes
The system health and system ID indicator is located towards the left control panel of the system for Rear Accessed
configuration and towards the right control panel of the system for Front Accessed configuration.
Figure 114. System health and system ID indicator
116
Systemdiagnose und Anzeigecodes
