Removing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4.
.
WARNING:
The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool before handling them.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
3. Lift the memory module away from the system.
Figure 82. Removing a memory module
Next steps
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
Steps
1. Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
2. If a memory module is installed in the socket, remove it.
114
Installing and removing system components
Содержание EMC PowerEdge XE7440
Страница 12: ...System information labels Figure 4 System board connectors 12 PowerEdge XE7440 overview ...
Страница 13: ...Figure 5 Express Service Tag PowerEdge XE7440 overview 13 ...
Страница 14: ...Figure 6 Memory information 14 PowerEdge XE7440 overview ...
Страница 15: ...Figure 7 System tasks PowerEdge XE7440 overview 15 ...
