NOTE:
Ensure that the socket ejector latches are fully open, before installing the memory module.
3. Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the
memory module in the socket.
CAUTION:
To prevent damage to the memory module or the memory module socket during installation, do
not bend or flex the memory module; insert both ends of the memory module simultaneously.
NOTE:
The memory module socket has an alignment key that enables you to install the memory module in the socket in
only one orientation.
CAUTION:
Do not apply pressure at the center of the memory module; apply pressure at both ends of the
memory module evenly.
4. Press the memory module with your thumbs until the ejectors firmly click into place. When the memory module is properly
seated in the socket, the levers on the memory module socket align with the levers on the other sockets that have memory
modules installed.
Figure 83. Installing a memory module
Next steps
1.
.
2.
3. Follow the procedure listed in
After working inside the system.
.
4. To verify if the memory module has been installed properly, press F2 and navigate to
System Setup Main Menu > System
BIOS > Memory Settings
. In the
Memory Settings
screen, the System Memory Size must reflect the updated capacity of
the installed memory.
5. If the System Memory Size is incorrect, one or more of the memory modules may not be installed properly. Ensure that the
memory modules are firmly seated in their sockets.
6. Run the system memory test in system diagnostics.
Installing and removing system components
115
Содержание EMC PowerEdge XE7440
Страница 12: ...System information labels Figure 4 System board connectors 12 PowerEdge XE7440 overview ...
Страница 13: ...Figure 5 Express Service Tag PowerEdge XE7440 overview 13 ...
Страница 14: ...Figure 6 Memory information 14 PowerEdge XE7440 overview ...
Страница 15: ...Figure 7 System tasks PowerEdge XE7440 overview 15 ...
