Figure 24. Installing the optical drive filler into the front bezel
2. On the optical drive cage, hold the tabs on the optical drive filler and push the filler into the optical drive cage.
Figure 25. Installing the optical drive filler into the optical drive cage
Next steps
1.
.
2. Follow the procedure that is listed in
After working inside your system
.
Removing the optical drive
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure that is listed in
Before working inside your system
.
3.
.
4. Disconnect the power and data cables from the back of the optical drive.
NOTE:
Ensure that you note the routing of the power and data cable on the side of the system as you remove them
from the system board and drive.
Steps
Press the release tab and slide the optical drive toward the front of the system.
Installing and removing system components
37
