Figure 58. Installing the heat sink onto the processor
Next steps
1
Install the processor and heat sink module.
2
Install the air shroud.
3
Follow the procedure listed in
After working inside your system
.
Related link
Installing a processor and heat sink module
Installing the air shroud
Installing a processor and heat sink module
Prerequisites
CAUTION:
Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1
Follow the safety guidelines listed in
2
If installed, remove the CPU dust cover.
Steps
1
Align the pin 1 indicator of the heat sink to the system board and then place the processor and heat sink module (PHM) on the
processor socket.
106
Installing and removing system components