Processor and memory module blank
Removing the processor and memory module blank
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. To release the processor and memory module blank from the socket, simultaneously press the ejectors on both ends of the
memory module socket to fully open.
2. Lift the processor and memory module blank away from the system.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 19. Removing the processor and memory module blank
Next steps
1.
Replace the processor and memory module blank
.
Installing the processor and memory module blank
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. To install the processor and memory module blank, first align the two guide pin in bolster with the hole of the blank.
30
Installing and removing system components
Содержание EMC PowerEdge MX750c
Страница 11: ...System information label Figure 5 Mechanical overview Dell EMC PowerEdge MX750c system overview 11 ...
Страница 12: ...Figure 6 Memory overview 12 Dell EMC PowerEdge MX750c system overview ...
Страница 13: ...Figure 7 System board Figure 8 Jumper settings Dell EMC PowerEdge MX750c system overview 13 ...
Страница 14: ...Figure 9 Quick Resource Locator Figure 10 System tasks 14 Dell EMC PowerEdge MX750c system overview ...
