manualshive.com logo in svg

Dell Edge Gateway 5000 Series, Инструкция по установке и эксплуатации, Страница: 61 / 64

Поделиться
Скачать
Dell Edge Gateway 5000 Series Скачать руководство пользователя страница 61

Environmental requirements

Operating (with a maximum 
temperature gradation of 15°C 
(59°F) per hour)

• Dell Edge Gateway 5000: 0°C to 

45°C (32°F to 113°F)

• Dell Edge Gateway 5100: -30°C 

to 70°C (-22°F to 158°F)

NOTE: The maximum operating 
temperature is derated 1°C/
305m (1000ft) above sea level 
altitude.

NOTE: The maximum operating 
temperature is derated 18°C 
(32.4°F) under direct solar 
thermal load.

Non-operating (with a 
maximum temperature 
gradation of 15°C (59°F) per 
hour)

-40°C to 70°C (-40°F to 158 °F)

Relative humidity (maximum):

Operating (with maximum 
humidity gradation of 10% per 
hour)

10% to 90% (non-condensing)

Non-operating (with maximum 
humidity gradation of 10% per 
hour)

5% to 95% (non-condensing)

Altitude (maximum, unpressurized):

Operating

-15.2m to 5000m (-50ft to 16,404ft)

NOTE: The maximum operating 
temperature is derated 1°C/
305m (1000ft) above sea level 
altitude.

Storage

-15.2m to 10,668m (-50ft to 
35,000ft)

61

Содержание Edge Gateway 5000 Series

































































Отзывы:

Нет отзывов