Dell E77S, Инструкция по установке и обслуживанию

Страница: 63 / 106

Figure 55. Removing the BOSS S2 module
Next steps
1. Replace the BOSS S2 module .
Installing the BOSS S2 module
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions .
2. Follow the procedure listed in the Before working inside your system .
3. If required, remove the air shroud .
Steps
1. Install the BOSS S2 module into the BOSS module cage.
2. Using the Phillips #1 screwdriver, secure the BOSS S2 module on the BOSS module bay with the two screws.
Figure 56. Installing the BOSS S2 module
Installing and removing system components 63