Dell E551 Color Monitor Quick Setup Guide
2
0RQLWRU &RQWUROV DQG ,QGLFDWRUV
1. Power button
Use this button to turn the monitor on and off.
2. Power indicator
This light glows green during normal operation.
3. ADJUST -/+
These buttons allow you to adjust the settings to lower or higher value of the
selected function.
4. SELECT -/+
These buttons allow you to select from the various functions.
5. Function indicators
The indicator will turn green when you select the respective function.
The description of function indicators is as below:
Brightness: adjusts the background brightness of the screen image.
Contrast: adjusts the contrast between the foreground and background of the screen image.
Horizontal size: adjusts screen width.
Horizontal position: moves screen image to the left or right.
Vertical size: adjusts screen height.
Vertical position: moves screen image up or down.
Pincushion: straightens the left and right vertical edges of the display.
Trapezoid: adjusts the width of the top and bottom of the screen.
Rotation: adjusts the viewing area when it is tilted left or right.
'ULYHU ,QVWDOODWLRQ
Use the monitor CD to install the appropriate monitor driver for your operating system.
0LFURVRIW
:LQGRZV
2SHUDWLQJ 6\VWHP
To manually install or update the driver, perform the following steps:
1. Click
Start
−
> Settings
−
> Control Panel and then double-click Display.
2. In
the
Display Properties window, click the Settings tab, and then click Advanced.
3. Click
the
Monitor tab, and then click Properties
Æ
Driver
Æ
Update Driver.
4. When
the
Update Device Driver Wizard dialog box appears, choose “Search for a suitable driver for my
device,” and click Next>.
5.
Insert the monitor CD into the CD-ROM drive, type
d:\
(change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer’s files from: box, and click Next> and then Finish to
complete the installation.
6. Close
the
Display Properties window.
0LFURVRIW
:LQGRZV
2SHUDWLQJ 6\VWHP
Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if
the monitor driver is not already installed.
1.
Insert the monitor CD into the CD-ROM drive, and click Next> twice when the Add New Hardware Wizard
dialog box appears.
2. Click
the
CD-ROM drive box to install the drivers from the CD and then click Next>.
3.
Confirm that the driver was found on the CD, and click Next> twice to install the driver.
4. Click
Finish to exit the Add New Hardware Wizard dialog box.
To manually install or update the driver, perform the following steps:
5. Click
Start
−
> Settings
−
> Control Panel and then double-click Display.
6. In
the
Display Properties window, click the Settings tab, and then click Advanced.
7. Click
the
Monitor tab, and then click Change.
-S E LE C T +
-A U J U S T +
R E C A L L