Table 3. Features available on the front of the system (continued)
Item
Ports, panels, and
slots
Icon
Description
5
Information Tag
N/A
The Information Tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address, and
so on. If you have opted for the secure default access to iDRAC,
the Information tag also contains the iDRAC secure default
password.
Left control panel view
Figure 4. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 4. Left control panel
Item
Indicator, button, or
connector
Icon
Description
1
Status LED indicators
N/A
Indicate the status of the system. For more information, see the
2
System health and system
ID indicator
Indicates the system health.
3
iDRAC Quick Sync 2
wireless indicator
(optional)
NOTE:
iDRAC Quick
Sync 2 wireless
indicator is available
only on certain
configurations.
Indicates if the iDRAC Quick Sync 2 wireless option is activated.
The Quick Sync 2 feature allows management of the system
using mobile devices. This feature aggregates hardware/
firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system.
You can access system inventory, Dell Lifecycle Controller logs
or system logs, system health status, and also configure iDRAC,
BIOS, and networking parameters. You can also launch the
virtual Keyboard, Video, and Mouse (KVM) viewer and virtual
Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the
Integrated Dell Remote
Access Controller User's Guide
at
Status LED indicators
NOTE:
The indicators display solid amber if any error occurs.
Table 5. Status LED indicators and descriptions
Icon
Description Condition
Corrective action
Drive
indicator
The indicator turns solid amber,
if there is a drive error.
●
Check the System event log to determine if the drive has an error.
●
Run the appropriate Online Diagnostics test. Restart the system,
and run embedded diagnostics (ePSA).
10
Dell EMC PowerEdge R440 system overview
