Chassis weight
Table 6. Chassis weight of the XC6420 Series sleds
System
Maximum weight (with all the sleds and drives)
24 x 2.5-inch hard drive systems
41.46 Kg (91.40 lb)
No backplane systems
34.56 Kg (76.19 lb)
Processor specifications
The XC6420 Series sled supports up to two Intel Xeon Scalable E5-2600 product family processors in each of the four independent sleds.
Each processor supports up to 28 cores.
System battery
The XC6420 Series sled uses a CR 2032 3V replaceable lithium coin cell battery.
Expansion bus specifications
The XC6420 Series sled supports four Generation 3 capable PCIe slots. Two slots are populated with the base configuration.
Table 7. Expansion bus specifications
PCIe Slots
Description
Form factor
x8 Mezzanine PCIe riser
Slot 1: x8 PCIe Gen3 from CPU 1
Custom form factor
x8 + x8 OCP Mezzanine riser
Slot 2: x8 PCIe Gen3 from CPU 1
Standard Open Compute Project (OCP)
form factor
Slot 3: x8 PCIe Gen3 from CPU 1
x16 PCIe main riser
Slot 4: x16 PCIe Gen3 CPU 1
Standard Low Profile PCIe form factor
x16 buried PCIe riser
Slot 5: x16 PCIe Gen3 from CPU 2
Custom form factor
NOTE:
M.2 SATA riser is supported
on the buried riser.
Memory specifications
The XC6420 Series sled supports DDR4 registered DIMMs (RDIMMs) and Load Reduced DIMMS (LRDIMMs) including 3D XPoint.
Table 8. Memory specifications
Memory module
sockets
Architecture
Memory capacity and
ranking
Minimum RAM
Maximum RAM
Sixteen 288-pin
2666 MT/s DDR4 RDIMMs
and LRDIMMS with support
for advanced ECC or memory
optimized operation
•
Single rank - 8 GB
•
Dual rank - 16 GB
•
Dual rank - 64 GB
•
8 GB with a single
processor
•
16 GB with dual
processor
•
512 GB with a single
processor
•
1024 GB with dual
processor
14
Technical specifications
Содержание E43S Series
