7
Remove the
shieldplate.
1. Remove the
2. Remove the mylar.
PCB.
1. Remove the tape
for the fixed wire.
2. Remove screws.
Страница 1: ...PTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES CAUTION USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING Dell E2219HN ...
Страница 2: ...surface wear gloves Step Figure Description Remove screws 1 Place the machine flat on the work table 2 Remove rear cover screws Remove the rear cover Remove the screws tear the tape and tear the foil 1 Remove the foil on the shieldplate 2 Remove the six corners screw 3 Remove the tape of the fixed wire Pull the line 1 Unplug the backlight line and the function key line 2 Pull off the wire tape the...
Страница 3: ...7 Remove the shieldplate 1 Remove the shieldplate 2 Remove the mylar Remove the PCB 1 Remove the tape for the fixed wire 2 Remove screws Remove the PCB ...
