15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND-sync
11
GND
12
DDC data
13
H-sync
14
V-sync
15
DDC clock
24-pin Digital-only DVI Connector
Note: Pin 1 is at the top right.
Pin Signal Assignment
Pin Signal Assignment
Pin Signal Assignment
1
T.M.D.S. Data 2-
9
T.M.D.S. Data 1-
17 T.M.D.S. Data 0-
2
T.M.D.S. Data 2+
10 T.M.D.S. Data 1+
18 T.M.D.S. Data 0+
3
T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4
No Pin
12 No Pin
20 No Pin
5
No Pin
13 No Pin
21 No Pin
6
DDC Clock
14 +5V Power
22 T.M.D.S. Clock Shield
7
DDC Data
15 Ground (for +5V)
23 T.M.D.S. Clock +
8
No Connect
16 Hot Plug Detect
24 T.M.D.S. Clock -
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select
different settings if required.
