Dell E14S Series Скачать руководство пользователя

Страница: 24 / 117

System Setup Main Menu

Table 11. System setup main menu

Option

Description

System BIOS

Enables you to configure BIOS settings.

iDRAC Settings

Enables you to configure iDRAC settings.
The iDRAC Settings utility is an interface to set up and configure the

iDRAC parameters by using UEFI. You can enable or disable various

iDRAC parameters by using the iDRAC Settings utility. For more

information about this utility, see the

Integrated Dell Remote Access

Controller User’s Guide

Dell.com/idracmanuals

Device Settings

Enables you to configure device settings.

Editing system BIOS screen settings

You can use the

System BIOS

screen to view the BIOS settings. You can also edit some of the settings

such as Boot Order, System Password, Setup Password, and enable or disable USB ports.

Go to

System Setup Main Menu

, and then click

System BIOS

The

System BIOS

screen is displayed.

System BIOS screen settings

The

System BIOS

screen details are explained below.

Table 12. System BIOS

Menu Item

Description

System Information

Displays information about the system such as the system model name,

BIOS version and Service Tag.

Memory Settings

Displays information and options related to the installed memory.

Processor Settings

Displays information and options related to the processor such as speed,

cache size, and so on.

SATA Settings

Displays options to enable or disable the integrated SATA controller and

ports.

Boot Settings

Displays options to specify the boot mode (BIOS or UEFI). Enables you to

modify UEFI and BIOS boot settings.

Network Settings

Displays options to change the network settings.

Integrated Devices

Displays options to enable or disable integrated device controllers and

ports, and to specify related features and options.

Serial Communication

Displays options to enable or disable the serial ports and specify related

features and options.

System Profile Settings

Displays options to change the processor power management settings,

memory frequency, and so on.

System Security

Displays options to configure the system security settings like, system

password, setup password, Trusted Platform Module (TPM) security, and

Содержание E14S Series






















































































































Результаты поиска

Содержание E14S Series

Отзывы:

Похожие инструкции для E14S Series

Бренды по названию

Популярные бренды

Dell E14S Series, Руководство пользователя

Результаты поиска

Содержание E14S Series

Отзывы:

Похожие инструкции для E14S Series

Бренды по названию

Популярные бренды