Dell Dimension XPS R Series, Руководство по установке

Страница: 14 / 60

1-6 Dell Dimension XPS Rxxx Systems Setup Guide
10. In the Windows NT Setup window, Click Next> .
If your system has a network card, it is automatically detected and the required
files are copied to your hard-disk drive. Go to step 11.
If your system does not have a network card, go to step 14.
11. When prompted for information about network connections, click the Do Not
Connect This Computer to a Network at This Time radio button.
Setup configures your files to run Windows NT, and the appropriate files are then
copied to your hard-disk drive.
NOTE: You can add or update network hardware or software after completing this
setup procedure by double-clicking the
Network icon in the Control Panel and
providing the necessary information.
12. Click Next> .
The Computer Name window appears and prompts you to enter the name of
your computer.
13. Type the unique name used to identify your computer on a network (up to
15 characters) and click Next> .
14. If you have a modem installed, the Install New Modem window appears. Con-
tinue with step 15.
If you do not have a modem installed, click Cancel and proceed to step 20.
15. Click Next> to let Windows NT detect any installed modem.
Dell recommends that you let Windows NT detect your modem. However, you
can click the
Don’t Detect My Modem; I Will Select From a List radio button,
and then manually select a modem.
16. Click Next> to continue the modem setup, or click Change... to select a different
modem.
Windows NT then installs the modem drivers and prompts you for information
about your current location.
17. Select the appropriate country from the drop-down list box. Provide your area
(city) code and any telephone number required to access an outside line. Specify
whether you are using tone or pulse dialing. Then click
Next> .
If you do not provide an area (city) code, the Dialing Properties dialog box
appears and prompts you to enter a code.
18. When a message tells you that the modem setup was successful, click Finish .
19. Verify the settings in the Modem Properties window; then click Close .