Dell Dimension 9150 Скачать руководство пользователя страница 32

Страница: 32 / 69

Removing and Installing Parts: Dell Dimension 9150 Service Manual

file:///T|/htdocs/systems/dim9150/en/sm/parts.htm[10/31/2012 7:59:36 AM]

Back to Contents Page

Removing and Installing Parts

Dell™ Dimension™ 9150 Service Manual

Memory

Cards

Drive Panels

Drives

Hard Drive

Floppy Drive

Media Card Reader

CD/DVD Drive

Power Supply

Processor

I/O Panel

Battery

System Board

Memory

You can increase your computer memory by installing memory modules on the system board. For information on the type of

memory supported by your computer, see "

Specifications

NOTICE:

Before you install new memory modules, download the most recent BIOS for your computer from the Dell™

Support website at support.dell.com.

Memory Overview

Memory modules should be installed in

pairs of matched memory size

speed

, and

technology

. If the memory modules

are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.

See the label in the corner of the module to determine the module's capacity.

NOTE:

Always install memory modules in the order indicated on the system board.

The recommended memory configurations are:

A pair of matched memory modules installed in connectors DIMM_1 and DIMM_2

A pair of matched memory modules installed in connectors DIMM_1 and DIMM_2 and another matched pair

installed in connectors DIMM_3 and DIMM_4

NOTICE:

Do not install ECC or buffered memory modules. Only unbuffered, non-ECC memory is supported.

If you install mixed pairs of DDR2 400-MHz (PC2-3200), DDR2 533-MHz (PC2-4300) and DDR2 667-MHz (PC2-5300)

Содержание Dimension 9150






































































Результаты поиска

Содержание Dimension 9150

Отзывы:

Похожие инструкции для Dimension 9150

Бренды по названию

Популярные бренды

Dell Dimension 9150, Руководство по обслуживанию

Результаты поиска

Содержание Dimension 9150

Отзывы:

Похожие инструкции для Dimension 9150

Бренды по названию

Популярные бренды