Dell Dimension 900 Скачать руководство пользователя страница 65

Страница: 65 / 122

support.dell.com

Software Solutions

4-9

15. Click

Finish

Windows

Setup

installs necessary files, and then restarts the system.

16. Select

Boot From Hard Drive

, and then press <Enter>.

17. In the

User Information

window, type your name and, if applicable, company

name, and then click

Next

The

Name

field must be completed; the

Company Name

field is optional.

The

License Agreement

window appears.

18. Click

I accept the Agreement

, and then click

Next

19. Type the Windows product key in the fields provided, and then click

Next

The product key is the bar code number found on the Microsoft Windows label,
which is located on the side of your system.

20. Click

Finish

Windows Setup

installs additional files, and then restarts the system.

21. Select

Boot From Hard Drive

, and then press <Enter>.

Windows Setup

installs additional files, and then restarts the system.

22. Select

Boot From Hard Drive

, and then press <Enter>.

23. Enter a password in the

Enter Network Password

window, if desired, and then

click

Next

24. Remove the

Dell Product Recovery CD

from the CD-ROM or DVD-ROM drive.

25. Enter the system setup program as directed by a Dell technical support

representative.

26. In the system setup program

Boot

menu, change the boot sequence so that the

diskette drive boots first, as directed by a Dell technical support representative.
Then, exit the system setup program.

Reinstalling Windows 2000

Insert the operating system CD into the CD-ROM or DVD-ROM drive.

Shut down the computer.

Start the computer.

Press any key when the

Press any key to boot from CD

message appears on

the screen.

When the

Windows 2000 Setup

screen appears, ensure that the

To setup

Win2000 now, press ENTER

option is highlighted. Then press <Enter>.

Содержание Dimension 900



























































































































Результаты поиска

Содержание Dimension 900

Отзывы:

Dell Dimension 900, Справочное и ремонтное руководство, Страница: 65 / 122

Результаты поиска

Содержание Dimension 900

Отзывы: