Dell Dimension 5100C Скачать руководство пользователя страница 37

Страница: 37 / 46

Boot Sequence

This feature allows you to change the boot sequence for devices.

Option Settings

Diskette Drive

—

The computer attempts to boot from the floppy drive. If the floppy disk in the drive is not bootable, if no floppy disk is in the drive, or if

there is no floppy drive installed in the computer, the computer generates an error message.

Hard Drive

—

The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error

message.

CD Drive

—

The computer attempts to boot from the CD drive. If no CD is in the drive, or if the CD has no operating system, the computer generates an

error message.

USB Flash Device

—

Insert the memory device into a USB port and restart the computer. When

F12 = Boot Menu

appears in the upper-right corner of

the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.

Changing Boot Sequence for the Current Boot

You can use this feature, for example, to restart your computer to a USB device such as a floppy drive, or memory key.

If you are booting to a USB device, connect the USB device to a USB connector (see "

Front View

Turn on (or restart) your computer.

When

F2 = Setup, F12 = Boot Menu

appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your
computer through the

Start

menu and try again.

The

Boot Device Menu

appears, listing all available boot devices.

Select a device and press <Enter>.

For example, if you are booting to a USB memory key, highlight

USB Flash Device

and press <Enter>.

Power Management

AC Recovery

Determines what happens when AC power is restored to the computer.

Auto Power On

Sets the computer to automatically turn on. Choices are

every day

or every

Monday through Friday

The default setting is

Off

This feature does not work if you turn off your computer using a power strip or surge protector.

Auto Power

Time

Sets time to automatically turn on the computer.

Time is kept in a 24-hour format (

hours:minutes

). Change the start-up time by pressing the right- or left-arrow key to increase or decrease

the numbers, or type numbers in both the date and time fields.

This feature does not work if you turn off your computer using a power strip or surge protector.

Suspend Mode

The options are

, a suspend state where the computer is running in a low-power mode, and

, a standby state where the power is

reduced or turned off for most components, however, system memory remains active.

Maintenance

SERR DMI

Message

Some graphics cards require that the SERR DMI message be disabled. The default setting is

Load Defaults

This setting restores the computer's factory-installed default settings.

Event Log

Displays the system event log.

POST Behavior

Fastboot

When set to

(default), your computer starts more quickly because it skips certain configurations and tests.

Numlock Key

This option involves the rightmost bank of keys on your keyboard. When set to

(default), this option activates the numeric and

mathematical features shown at the top of each key. When set to

Off

, this option activates the cursor-control functions labeled on the

bottom of each key.

POST Hotkeys

This option allows you to specify the function keys to display on the screen when the computer starts.

Keyboard

Errors

This option enables or disables keyboard error reporting when the computer starts.

NOTICE:

If you modify any boot sequence settings, save the new settings to avoid losing the changes.

NOTE:

To boot to a USB device, the device must be bootable. To make sure that your device is bootable, check the device documentation.

Содержание Dimension 5100C















































Результаты поиска

Содержание Dimension 5100C

Отзывы:

Dell Dimension 5100C, Руководство по обслуживанию, Страница: 37 / 46

Результаты поиска

Содержание Dimension 5100C

Отзывы: